-
Overall requirements for compression molding of fiberglass products (BMC compression molding manufacturer)
2018-02-08 1612
There are four basic requirements: ① Strength-- For the functionality of the product. ② Density-- For the lifespan of the product. ③ Accuracy-- Requirements for the product. ④ Smooth finish: - for t
-
Advantages of SMC/BMC compression molding process (BMC compression molding product manufacturer)
2018-01-09 1775
(1) The loss of materials is small and will not cause excessive loss (usually 2% to 5% of the product quality). (2) The internal stress of the product is very low, and the bending deformation is also
-
Characteristics of BMC Compression Molding Process (BMC Compression Molding Product Manufacturer)
2017-12-29 1697
① The amount of wasted materials is small, generally only accounting for 2% -5% of the total material consumption. The actual amount of material loss also depends on the shape, size, and disorder of t
-
The main functions of molded plastics
2014-04-04 1641
Physical Function The forming shortening rate of phenolic molding plastics depends on various factors, such as resin composition, filler variety, moisture content, and composition Shape conditions, e
-
Forming of molding materials
2014-03-29 1543
Restricted Forming In restricted forming, the plasticization, filling, and curing reactions of the material are all carried out in the mold. In this process, the primary focus is on Control three tec
-
What is bulk molding compound
2014-03-26 1374
BMC(DMC)data yesBulk(Dough) molding compoundsThe abbreviation for lump shaped molding compound. It is commonly referred to as unsaturated polyester bulk molding compound in China. Its main materials
-
Construction technology of SMC plastic inspection well
2014-03-14 1423
AWell pit and foundation: 1The well pit should be excavated together with the pipe trench, and the main pipeline of the well seat should be on the same axis as the pipeline in the pipe trench durin
-
Conditions and methods for improving SMC products
2014-03-11 1331
SMCThe molding quality of accessories depends on factors such as press equipment, molds, technical parameters, and the quality of staff. Ke YiSMCThe excellent and stable quality of molded parts not o
-
Analysis of Two Quality Issues in Rubber Molded Products
2014-02-28 1131
oneLack of glueManifesting as loose, pockmarked, or hollow surfaces (in whole or in part) on the surface, the reasons for their occurrence and prevention methods:（1） Insufficient feeding amount To ens
-
Characteristics of SMC molded insulation board
2014-02-26 1301
SMCIt is a thermosetting reinforced plastic with the following characteristics; 1The stability of the linear expansion scale is good, and the cold and hot deformation system is very small. 2Good cre