SMCIt is a thermosetting reinforced plastic with the following characteristics;
1The stability of the linear expansion scale is good, and the cold and hot deformation system is very small.
2Good creep and fatigue function.
3High mechanical strength and impact resistance up to90KJThe bending strength can reach170MPa.
4High water resistance, due to its water absorption rate of only20mg/m2.
5Good corrosion resistance, with minimal corrosion from various acids and bases.
6The temperature resistance indicator is high, and its thermal deformation temperature can reach230℃.
7The flame retardant function is high, and its incineration hazard function is960Above ℃, the flame retardant function can reachVL--94canonicalV---0
Grade.
8High electrical function, with a volume resistance of up to1×1014Ω, Voltage endurance can reach12KV/mm.
9Strong resistance to natural aging, suitable for use under natural conditions15There will be no significant changes or transformations in the year.
This article is from:www.yongshengyi.com
04-29
Types of sheets used for SMC products
Common fiberglass processes include hand lay up, RTM, pultrusion, and compression molding, with steel molds used for mass production of pultrusion and compression molding. Molding strengths: (1) The m
03-25
SMC fiberglass mold laying steps
SMC mold is a combination plastic mold used for compression molding, extrusion molding, injection molding, blow molding, and low foaming molding. It mainly consists of a concave mold with a variable c
02-25
What are the characteristics of SMC molded insulation board
SMC is a thermosetting reinforced plastic with the following characteristics:;1. The stability of the line expansion standard is good, and the cold and hot deformation system is very small.2. Good cre
01-09
How to improve the quality of SMC products
The molding quality of SMC accessories depends on factors such as press equipment, molds, technical parameters, and the quality of operators. The excellent and stable quality of SMC molded parts not o