(1) The loss of materials is small and will not result in excessive loss (usually 2% to 5% of the product quality).

(2) The internal stress of the product is very low, and the bending deformation is also very small, with relatively stable mechanical properties.

(3) The wear of the mold cavity is minimal, and the maintenance cost of the mold is relatively low.

(4) The cost of molding equipment for molded products is lower, and its mold structure is simpler. The manufacturing cost is generally lower than that of injection molds or transfer molding molds.

(5) Can form larger flat products. The standards for products that can be molded by compression molding are only determined by the clamping force of existing compression molding machines and template standards.

(6) The shortening rate of the product is small and the repeatability is good.

(7) Molded products can have a high production rate by placing molds with a large number of cavities on a given template.

(9) You can get used to actively adding ingredients and taking out products.

(10) High production efficiency, easy to achieve specialized and proactive production.

(11) The product has high standard accuracy and good repeatability.

(12) The surface is smooth and does not require secondary modification.

(13) Can produce products with a disordered structure in one go.

(14) Mass production at relatively low prices.

Article source:SMC molded products http://www.jmlicheng.com